nRF52840 Event-Driven Firmware Hands-on

Organizing buttons, timers, BLE and sensors with an event queue and a state transition table

Published

October 17, 2026

Introduction

English version — machine-assisted translation (by generative AI, Anthropic Claude) of the original Japanese hands-on. 日本語版はこちら.

A microcontroller program at first works fine if you just line up the processing inside loop(). However, as features grow, such as

  • wanting to start a measurement when a button is pressed
  • wanting to read a sensor every 100 ms
  • wanting to receive commands from a smartphone over BLE
  • wanting the same button to mean different things while measuring and while idle,

if statements and flags get tangled together, and you lose track of “in which state, when what happens, what to do”.

In this hands-on, using Nordic Semiconductor’s BLE microcontroller nRF52840 (Seeed Studio XIAO nRF52840), we build firmware with an event-driven + state transition table design in which

  1. all occurrences — interrupts, timers, BLE and so on — are pushed onto a queue as “events”,
  2. the main loop takes out events one at a time, and
  3. selects and runs a process (handler) from a “state × event” table (state transition table).

flowchart LR
  subgraph Sources["Event sources"]
    BTN["Button interrupt"]
    TMR["Timer"]
    BLE["BLE callback"]
  end
  BTN -->|"event_post()"| Q[("Event queue<br/>(FreeRTOS Queue)")]
  TMR -->|"event_post()"| Q
  BLE -->|"event_post()"| Q
  Q -->|"event_wait()"| LOOP["Main loop"]
  LOOP --> TBL["State transition table<br/>handler_table[state][event]"]
  TBL --> H["Handler<br/>processes and returns the next state"]
  H -->|"next state"| LOOP

Sample firmware

This hands-on comes with sample firmware that you can build and flash as is.

NoteDownload

firmware.zip — PlatformIO project (two environments: one for the XIAO nRF52840 Sense and one for the plain XIAO nRF52840 without Sense)

Feature Details
States Idle (WAIT) / Measuring (MEAS)
Button Short press while idle → start measurement; long press (1 s or more) while measuring → stop
Timers Read acceleration every 100 ms; aggregate every 1 s and notify over BLE
BLE Receives the commands “get device info”, “start/stop measurement” and “get latest value” from a smartphone or PC
LED Changes color and blink pattern according to the state and the connection status
Browser You can operate the device from this page via the BLE console in Chapter 9 (Chrome / Edge)

The code in each chapter displays the source files of this sample firmware as they are.

Who this is for

  • Those who have blinked an LED or read a sensor with Arduino
  • Those who know the basics of C/C++ (functions, structs, enum, a first taste of pointers)
  • Those who have struggled with a loop() that kept getting longer

What you need

Item Notes
Seeed Studio XIAO nRF52840 Sense The XIAO nRF52840 without Sense also works (acceleration becomes dummy data)
USB Type-C cable One that supports data transfer
1 tactile switch, jumper wires Connect between D8 and GND
PC VS Code + PlatformIO
Chrome or Edge (PC / Android) For the BLE console in Chapter 9 (Safari on iPhone does not support Web Bluetooth)

Chapters

Chapter Content Approx. time
1 Development environment and the nRF52840 30 min
2 Why go event-driven? (a state machine simulator that runs in the browser) 20 min
3 The event queue 30 min
4 The state transition table 30 min
5 Event source ①: button interrupt 25 min
6 Event source ②: timer 15 min
7 Event source ③: BLE 30 min
8 Sensor and LED display 20 min
9 Operating from the browser: Web Bluetooth console 20 min
10 Design tips and common pitfalls 30 min
11 Review questions and further exercises 30 min
NoteSlide version

Key-point slides for lectures are here.